The Quilter Banner combines big, bold lettering with brightly colored fabrics. 

The CD contains machine embroidery designs in the following formats: art60, .art, .dst, .exp, .hus, .jef, .pes, .vip, .vp3 and step-by-step instructions for banner.

The word, QUILTER, has been divided into hoopings for individual letters, two letters at a time, and three letters at a time. A hoop with an embroidery field AT LEAST 145mm x 255mm (5.7” x 10.0”) is required for individual letter hooping. Hoopings for two and three letters at a time will depend on size of your hoop. Each letter is 4.12” in height and 4.19” in width. There is 1/2” of space between each letter in the banner.

*Pattern includes cutting instructions and SVG cutting files that can be used with your preferred electronic cutting machine. 

This pattern was not designed for the type of applique where you cut away the extra fabric. The templates are the actual applique size and after cutting out the pieces, you will place the pieces within stitched-out placement lines.

HOWEVER: You CAN use the cutaway method for your applique, but you will have to repeat the placement line after you place your fabric down and before you cut your fabric away.   I do not include a second placement line or a tack down stitch in my designs.

This pattern was not designed for the type of applique where you cut away the extra fabric. The templates are the actual applique size and after cutting out the pieces, you will place the pieces within stitched-out placement lines.

HOWEVER: You CAN use the cutaway method for your applique, but you will have to repeat the placement line after you place your fabric down and before you cut your fabric away.   I do not include a second placement line or a tack down stitch in my designs.